Quooker Fusion FNRRCO Round Tap

The Fusion Round combines a boiling-water tap and mixer tap in one, delivering hot, cold and boiling water from a single tap with a double-walled, round spout. It has a child-proof double push-and-turn handle and works with COMBI and CUBE tanks. Depending on configuration, it can provide filtered chilled, filtered sparkling and 108°C filtered water, with thermostatic temperature regulation and built-in safety features.

SKU:FNRRCO

EAN:8720823105981

Category::Taps

Quantity:

Key Features

Combined boiling-water and mixer tap – boiling-water tap and mixer tap are combined in the Fusion Round.

Child-proof double push-and-turn handle – manufactured with a child-proof double push-and-turn handle.

Hot, cold and boiling water from a single tap – hot, cold and boiling water from one tap with a double-walled, round spout.

Multiple premium finishes – available in stainless steel (RVS), polished chrome (CHR), gunmetal (GME), black (BLK), rose copper (RCO), patinated brass (PTN) and gold (GLD).

Thermostatic temperature regulation – thermostatic temperature regulation for the water heater.

HiTAC® High Temperature Activated Carbon filter – integrated water filter in the COMBI tank.

108°C filtered water capability – system provides 108°C filtered water.

Filtered chilled and sparkling water (with CUBE) – CUBE tank delivers filtered chilled and filtered sparkling water.

Energy-efficient water heating – water heating energy efficiency class A with a declared load profile XXS and 36% water heating energy efficiency.

Space-saving under-sink tanks – compact COMBI and CUBE tank dimensions support under-sink installation.

Safety pressure relief – maximum temperature/pressure relief valve set to 8 bar on the COMBI tank.

Technical Spec

Product nameFusion Round

Water functions (Fusion Round)Hot, cold and boiling water from a single tap with a double-walled, round spout

Handle typeChild-proof double push-and-turn handle

Tap hole diameterTap hole Fusion: 35mm (Hole Ø35 stated)

Max. worktop thicknessMax. thickness 50 (exact unit not stated in source)

FinishesStainless steel (RVS), polished chrome (CHR), gunmetal (GME), black (BLK), rose copper (RCO), patinated brass (PTN), gold (GLD)

Tank typeCOMBI

Voltage230V

Wattage2200W

Capacity7 litres

Heating-up time20 minutes

Stand-by power consumption10W* (*These are average values.)

Tank height49 cm

Total height requirement55 cm

Tank diameter20 cm (Ø20 stated)

Min. mains pressure200kPa (2 bar)

Recommended pressure200–400kPa (2–4 bar)

Volume at 40°C27 litres* (*These are average values.)

Volume at 60°C15 litres* (*These are average values.)

Mounting bracketMounting bracket optional: yes

Temperature regulationThermostatic

Safety featureMaximum temperature/pressure relief valve 8 bar

Water filter (COMBI)HiTAC® water filter: High Temperature Activated Carbon

Declared load profileXXS

Water heating energy efficiency classA

Water heating energy efficiency36%

Annual electricity consumption511 kWh/A

Warm water temperature settings40–60°C

Tank typeCUBE

Voltage220–240 V

Wattage100 W

Flow rate – filtered chilled water2,4 litres/min (*These values are averages.)

Flow rate – filtered sparkling water2 litres/min (*These values are averages.)

Chilling time*30 min (*These values are averages.)

Standby consumption*5 W (*These values are averages.)

Tank height50 cm

Tank width15,3 cm (22,3 cm including CO&sub2 cylinder)

Depth27 cm (34 cm including CO&sub2 cylinder)

Min. water pressure200kPa (2 bar)

Max. water pressure400 kPa (4 bar)

Max. CO&sub2 pressure400 kPa (4 bar)

Water filter (CUBE)HF + AC

Additional Details and Installation

The Fusion Round provides hot and cold water through an inlet combination mixing valve between 40°C and 60°C. In the COMBI configuration, the system delivers 108°C filtered water. When combined with the CUBE tank, it also provides filtered chilled and filtered sparkling water, supported by a pressure reducing valve and appropriate water pressure requirements.

Installation requires a tap hole of 35mm and allowance for the COMBI tank height of 49 cm (total height requirement 55 cm) and the CUBE tank height of 50 cm. Minimum mains water pressure is 200kPa (2 bar), with a recommended range of 200–400kPa (2–4 bar) for the COMBI tank, and a maximum water and CO&sub2 pressure of 400 kPa (4 bar) for the CUBE tank.

Safety is supported by thermostatic temperature regulation and a maximum temperature/pressure relief valve set to 8 bar on the COMBI tank, alongside integrated filtration with HiTAC® High Temperature Activated Carbon and HF + AC filters.

Downloads

Download product documentation, manuals, and specification sheets.

FNRRCO Spec

PDF

Frequently Asked Questions

What water functions does the Fusion Round tap provide?

The Fusion Round combines a boiling-water tap and mixer tap, delivering hot, cold and boiling water from a single tap with a double-walled, round spout. In combination with the COMBI and CUBE tanks, it can also provide 108°C filtered, filtered chilled and filtered sparkling water.

Which finishes are available for the Fusion Round?

The available finishes are stainless steel (RVS), polished chrome (CHR), gunmetal (GME), black (BLK), rose copper (RCO), patinated brass (PTN) and gold (GLD).

What are the key safety features?

The tap is manufactured with a child-proof double push-and-turn handle. The COMBI tank includes thermostatic temperature regulation and a maximum temperature/pressure relief valve set to 8 bar.

What power supply is required for the COMBI and CUBE tanks?

The COMBI tank operates at 230V with a wattage of 2200W. The CUBE tank operates at 220–240 V with a wattage of 100 W.

What water pressure is needed for installation?

For the COMBI tank, the minimum mains pressure is 200kPa (2 bar) with a recommended range of 200–400kPa (2–4 bar). For the CUBE tank, the minimum water pressure is 200kPa (2 bar), and the maximum water and CO&sub2 pressure is 400 kPa (4 bar).

What are the key dimensions for under-sink installation?

The COMBI tank height is 49 cm with a total height requirement of 55 cm and a diameter of 20 cm. The CUBE tank height is 50 cm, width 15,3 cm (22,3 cm including the CO&sub2 cylinder), and depth 27 cm (34 cm including the CO&sub2 cylinder). The required tap hole diameter for the Fusion Round is 35mm.