Quooker Classic Nordic Square CNSSSST Tap

The Classic Nordic Square single tap is a boiling-water tap with a straight spout, designed to complement a country style mixer tap. It dispenses 108°C filtered boiling water and is suitable for use with a COMBI tank, and optionally a CUBE tank for filtered chilled and filtered sparkling water. The tap is height-adjustable, can be rotated 360° and is available in polished chrome (CHR) and stainless steel (RVS) finishes.

SKU:CNSSSST

EAN:8720823101204

Category::Taps

Quantity:

Key Features

Boiling-water tap providing 108°C filtered boiling water.

Classic look designed to match an existing country style mixer tap.

Straight spout design for a clean, square Nordic appearance.

Height-adjustable tap for flexible use at the sink.

360° rotatable spout allowing full rotation for convenient positioning.

108°C filtered water supplied via a Nordic boiling-water tap system.

Compatible with COMBI tank for boiling and warm water from one system.

Optional CUBE tank for filtered chilled and filtered sparkling water in addition to boiling water.

Available finishes in polished chrome (CHR) and stainless steel (RVS).

Thermostatic temperature regulation in the COMBI tank installation.

HiTAC® water filter using High Temperature Activated Carbon in the COMBI tank.

Safety protection with maximum temperature/pressure relief valve set at 8 bar in the COMBI tank.

Energy-efficient water heating with water heating energy efficiency class A for the COMBI tank.

Cold 40°C – 60°C inlet combination via mixing valve noted for the system.

Technical Spec

Tap typeClassic Nordic single tap Square boiling-water tap

Spout typeStraight spout, height-adjustable, 360° rotatable

Tap hole – boiling-water tap32 mm (Hole Ø32)

Tap hole – mixer tap35 mm

Maximum worktop thickness50

Total height requirement (tap + tank area)55 cm (with COMBI tank)

Finish optionsPolished chrome (CHR), stainless steel (RVS)

Tank typeCOMBI

Voltage230V

Wattage2200W

Capacity7 litres

Heating-up time20 minutes* (average value)

Stand-by power consumption10W* (average value)

Tank height47 cm

Tank diameter20 cm

Minimum mains pressure200 kPa (2 bar)

Recommended pressure200–400 kPa (2–4 bar)

Volume at 40°C27 litres* (average value)

Volume at 60°C15 litres* (average value)

Mounting bracketOptional: yes

Temperature regulationThermostatic

Safety featureMaximum temperature/pressure relief valve 8 bar

Water filterHiTAC® High Temperature Activated Carbon

Declared load profileXXS

Water heating energy efficiency classA

Water heating energy efficiency36%

Annual electricity consumption511 kWh/A

Warm water temperature settings40–60°C

Cold inlet combination40°C – 60°C inlet combination mixing valve

Tank typeCUBE

Voltage220–240 V

Wattage100 W

Flow rate – filtered chilled water2,4 litres/min

Flow rate – filtered sparkling water2 litres/min

Chilling time*30 min (average value)

Standby consumption*5 W (average value)

Tank height50 cm

Tank width15,3 cm (22,3 cm including CO&sub2 cylinder)

Depth27 cm (34 cm including CO&sub2 cylinder)

Minimum water pressure200 kPa (2 bar)

Maximum water pressure400 kPa (4 bar)

Maximum CO&sub2 pressure400 kPa (4 bar)

Water filterHF + AC

Downloads

Download product documentation, manuals, and specification sheets.

CNSSSST Spec

PDF

Frequently Asked Questions

What type of water does the Classic Nordic Square single tap provide?

It is a Nordic boiling-water tap that provides 108°C filtered boiling water. When installed with a COMBI tank it also forms part of a system that delivers warm water at 40–60°C, and with an additional CUBE tank it can be used in an installation that provides filtered chilled and filtered sparkling water.

Can the tap be rotated or adjusted in height?

Yes. The Classic Nordic Square single tap has a straight spout that is height-adjustable and can be rotated 360°.

Which finishes are available for this tap?

The tap is available in polished chrome (CHR) and stainless steel (RVS) finishes.

What are the electrical requirements for the COMBI and CUBE tanks?

The COMBI tank operates at 230V with a wattage of 2200W. The optional CUBE tank operates at 220–240 V with a wattage of 100 W.

What water pressure is needed for the system?

For the COMBI tank, the minimum mains pressure is 200 kPa (2 bar) and the recommended pressure is 200–400 kPa (2–4 bar). For the CUBE tank, the minimum water pressure is 200 kPa (2 bar) and the maximum water pressure is 400 kPa (4 bar), with maximum CO&sub2 pressure also at 400 kPa (4 bar).

What safety and filtration features are included?

The COMBI tank includes thermostatic temperature regulation and a maximum temperature/pressure relief valve set at 8 bar. It uses a HiTAC® High Temperature Activated Carbon water filter. The CUBE tank uses an HF + AC water filter.