Preferred Appliances Supplier for Architects, Designers and Developers in London.
Keep typing… 4 characters minimum
Results will appear after 4 characters..
The Classic Fusion Round combines a boiling-water tap and mixer tap in one, designed to fit in every country style kitchen. It delivers hot, cold and 108°C filtered boiling water from a single tap with a double-walled, round spout. A child–proof double push-and-turn handle supports safe operation. Available with different finishes, it works with PRO3 and optional CUBE tanks for filtered chilled and filtered sparkling water.
The Classic Fusion Round is intended for installation with a 35mm tap hole and a maximum worktop thickness of 50mm. It combines hot, cold and 108°C filtered boiling water using a child–proof double push-and-turn handle and a double-walled round spout.
When installed with the PRO3 tank, the system provides 3 litres of boiling water with a typical heating-up time of 10 minutes and average stand-by power consumption of 10W. The PRO3 requires 230V, has a height of 46,7cm, a diameter of 15cm and a total height requirement of 54cm, with recommended pressure between 200–400kPa (2–4 bar). A maximum temperature / pressure relief valve (8 bar) and HiTAC® High Temperature Activated Carbon water filter are included, and a mounting bracket is optionally available.
When combined with the CUBE tank in addition to PRO3, the installation can supply filtered chilled and filtered sparkling water as well as 108°C filtered water. The CUBE operates at 220–240V, 100W, with a flow rate of 2,4 litres/min for filtered chilled water and 2 litres/min for filtered sparkling water. It has a chilling time of 30 minutes and average standby consumption of 5W, with pressure requirements between 200kPa and 400kPa (2–4 bar) for both water and CO&sub2. The CUBE tank measures 50cm in height, 15,3cm in width (22,3cm including the CO&sub2 cylinder) and 27cm depth (34cm including the CO&sub2 cylinder), and uses an HF + AC water filter.
The Classic Fusion Round provides hot, cold and 108°C filtered boiling water from a single tap. When used with the CUBE tank as well as PRO3, it can also provide filtered chilled and filtered sparkling water.
The tap is manufactured with a child–proof double push-and-turn handle. In addition, the PRO3 installation includes a safety feature in the form of a maximum temperature / pressure relief valve set to 8 bar.
The Classic Fusion Round is available in stainless steel (RVS), polished chrome (CHR) and patinated brass (PTN).
The PRO3 tank requires 230V power, has a capacity of 3 litres and a wattage of 1600W. It has a height of 46,7cm, a diameter of 15cm and a total height requirement of 54cm. The recommended operating pressure is 200–400kPa (2–4 bar) with minimum mains and hot water pressures of 200kPa (2 bar).
The CUBE tank operates on 220–240V with a wattage of 100W. It delivers filtered chilled water at 2,4 litres/min and filtered sparkling water at 2 litres/min, with a chilling time of 30 minutes and average standby consumption of 5W. It measures 50cm high, 15,3cm wide (22,3cm including CO&sub2 cylinder) and 27cm deep (34cm including CO&sub2 cylinder), and operates between 200kPa and 400kPa (2–4 bar) for both water and CO&sub2 pressure.
The Classic Fusion Round requires a 35mm tap hole (Hole Ø35) and supports a maximum worktop thickness of 50mm.
Speak to our team for expert advice and personal service, whether you are planning a project or selecting appliances.