Preferred Appliances Supplier for Architects, Designers and Developers in London.
Keep typing… 4 characters minimum
Results will appear after 4 characters..
The Classic Fusion Round combines a boiling–water tap and mixer tap in one, designed to fit into a country style kitchen. It provides hot, cold and 108°C filtered boiling water from a single tap with a double–walled, round spout. A child–proof double push–and–turn handle adds safety. Available with the PRO3 tank and optional CUBE, it offers filtered chilled, filtered sparkling and 108°C filtered water from one integrated system.
The Classic Fusion Round is installed using a 35mm tap hole with a maximum worktop thickness of 50. It connects to both hot and cold water supplies and to the PRO3 tank for 108°C filtered boiling water. Minimum mains and hot water pressure of 200kPa (2 bar) are required, with a recommended pressure range of 200–400kPa (2–4 bar). A mounting bracket for the PRO3 tank is optional.
When combined with the CUBE, the system additionally provides filtered chilled and filtered sparkling water. The CUBE operates at 220–240 V with 100 W wattage, and requires water pressure between 200kPa (2bar) and 400kPa (4bar). CO₂ pressure may be up to 400 kPa (4bar). The PRO3 tank incorporates a maximum temperature and pressure relief valve set at 8 bar for safety.
The HiTAC® water filter in the PRO3 tank uses High Temperature Activated Carbon, while the CUBE uses an HF + AC water filter. The child–proof double push–and–turn handle is used to operate the boiling water function.
It provides hot, cold and 108°C filtered boiling water from a single tap when used with the PRO3 tank. When combined with the CUBE, it also provides filtered chilled and filtered sparkling water.
The Classic Fusion Round is available in polished chrome (CHR), stainless steel (RVS) and patinated brass (PTN).
The tap has a child–proof double push–and–turn handle for controlling boiling water. The PRO3 tank includes a maximum temperature and pressure relief valve set at 8 bar.
For the PRO3 installation, the minimum mains and hot water pressure is 200kPa (2 bar), with a recommended pressure of 200–400kPa (2–4 bar). For the CUBE, minimum water pressure is 200kPa (2bar) and maximum water and CO₂ pressure is 400 kPa (4bar).
The PRO3 tank operates at 230V with 1600W wattage, has a 3 litre capacity, an average heating–up time of 10 minutes, and an average stand–by power consumption of 10W. It has a height of 46,7cm, a total height requirement of 54cm and a diameter of 15cm.
The CUBE operates at 220–240 V with 100 W wattage. It has a chilling time of 30 min (average) and a standby consumption of 5 W (average). The tank height is 50 cm, width 15,3 cm (22,3cm including the CO₂ cylinder) and depth 27 cm (34cm including the CO₂ cylinder).
Speak to our team for expert advice and personal service, whether you are planning a project or selecting appliances.