








The Series 4 PNP6B6K40 is a 60 cm built-in gas hob with a black tempered glass surface and front-mounted integrated controls. It offers four gas burners, ergonomic sword dials with ignition via the control dials, and cast iron pan supports with rubber feet. Dishwasher-suitable pan supports and semi-continuous supports help make cleaning easier, while the flame failure safety device provides additional safety by preventing unwanted gas flow if the flame goes out.
The hob has four gas burners: a left front standard burner up to 1.75 kW, a left rear standard burner up to 1.75 kW, a right rear high-speed burner up to 3 kW and a right front economy burner up to 1 kW, depending on gas type.
Yes, it is usable with various natural gas types (including Nat gas L/LL G25/20 mbar, NG H/E 20 mbar, E+ 20/25 mbar, Natural gas H 25 mbar, Natural gas L 25 mbar) and liquid gas types (G30,31 28-30/37 mbar, G30 37 mbar, liquid gas 50 mbar). It is pre-set for natural gas and includes a nozzle set for LPG jets.
Yes, the cast iron pan supports are described as dishwasher suitable, allowing easy, scrub-free cleaning.
The hob has a flame failure safety device that prevents unwanted gas flow when the flame goes out, and a safety gas cut-off which instantly cuts off the gas supply if the flame goes out.
The required niche size for installation is 45 x 560 x (480 – 490) mm. The minimum worktop thickness is 20 mm, or 30 mm if the hob is installed flush with the worktop.
No, the hob is specified as being without a residual heat indicator.
Speak to our team for expert advice and personal service, whether you are planning a project or selecting appliances.