







The Series 2 PBP6B6K60 is a 60 cm built-in gas hob with a black enamel surface and lateral integrated controls. It offers four gas burners with ergonomic sword dials and wider dial spacing for easier cleaning. Continuous cast-iron finish pan supports with rubber feet provide maximum stability, while flame failure safety instantly cuts off the gas supply if the flame goes out. It is pre-set for natural gas and supplied with an LPG nozzle set.
This hob has 4 gas burners: a left front high-speed burner up to 3 kW, left rear standard burner up to 1.75 KW, right rear standard burner up to 1.75 KW, and right front economy burner up to 1 KW (all depending on gas type).
Yes. It is pre-set for natural gas and usable with several natural gas types and liquid gas types including G30,31 28–30/37 mbar, G30 37 mbar (PL) and liquid gas 50 mbar. A nozzle set for LPG jets is included for connection to 28–30/37 mbar bottled gas; other nozzles can be ordered via customer service.
It has a flame failure safety device that prevents unwanted gas flow when the flame goes out and a safety gas cut-off which instantly cuts off the gas supply if the flame goes out.
The hob offers ignition via the control dials. You just push and turn the dials to ignite the flame.
The required niche size for installation is 45 x 560–560 x 480–490 mm, with a minimum worktop thickness of 20 mm.
No. The hob is specified as being without a residual heat indicator.
Speak to our team for expert advice and personal service, whether you are planning a project or selecting appliances.