







This 60 cm Series 2 stainless steel gas hob PBP6B5K60 is a built-in model with four gas burners and side-mounted sword dials. It is designed for ergonomic control, with strong-grip knobs and ignition via the dials. Continuous cast-iron finish pan supports provide stability, while wider dial spacing and a seamless stainless steel surface support easier cleaning. A flame failure safety device helps prevent unwanted gas flow if the flame goes out.
The hob has 4 gas burners: one high-speed burner up to 3 kW, two standard burners up to 1.75 kW, and one economy burner up to 1 kW (depending on gas type).
The control dials are located on the right-hand side of the hob, with side-mounted sword knobs for ergonomic access.
Ignition is via the control dials. You simply push and turn the dials to ignite the flame.
Yes. It has a flame failure safety device that prevents unwanted gas flow when the flame goes out, and a safety gas cut-off that instantly cuts off gas supply if the flame goes out.
The hob is pre-set for natural gas and is usable with several natural gas and liquid gas types as specified, including Nat gas L/LL G25/20 mbar, NG H/E 20 mbar, E+ 20/25 mbar, Natural gas H 25 mbar, Natural gas L 25 mbar, and various liquid gas configurations. A nozzle set for LPG jets is included for 28–30/37 mbar bottled gas.
The required niche size for installation is 45 x 560 x 480–490 mm, with a minimum worktop thickness of 20 mm. The hob width is 580 mm and overall dimensions are 45 x 580 x 510 mm, with product dimensions also stated as 51.8 x 580 x 510 mm.
Speak to our team for expert advice and personal service, whether you are planning a project or selecting appliances.